TOOLING COMPONENTS

  • LOCATING PINS

"L" PINS

"L" - PINS* are quick removable locating devices for precision alignment of work pieces in jigs and fixtures.
"L" handle is ideal where space is a consideration.
"L" PINS* can be ordered with an optional nylon
covered steel cable for attachment at Point "E" for connecting pins to jigs and fixtures.
(Specify part number and add A ie: 180-00A)
* Add the price of 190-00 cable.
* Pins are hardened and ground with black oxide finish.
* Handle is drilled to receive pin which allows pin to be used all the way to handle.
HEAT TREATED STEEL
BLACK OXIDE FINISH

 

 

"T" PINS 

"T" - PINS* are quick removable locating devices for precision alignment of work pieces in jigs and fixtures.
"T" handle offers a better grip for easy removal.
"T" - PINS * can be ordered with an optional nylon covered steel cable for attachment at Point "E" for connecting pins to jigs and fixtures.
(Specify part number and add A ie: 181-00A)
* Add the price of 190-00 cable.
* Pins are hardened and ground with black oxide finish.
* Handle is drilled to receive pin which allows pin to be used all the way to handle.
HEAT TREATED STEEL
BLACK OXIDE FINISH

 

 

STEEL CABLE

This ferrule is supplied uncrimped for installation 

FERULES 


JIG PIN

BLACK OXIDE FINISH

JIG GAGE PIN

1113 steel tips, carburized - hardened.
BLACK OXIDE FINISH PER MIL SPEC. C-13924A.

CLAMPING PIN

Used for clamping various thickness of material by adjusting the collar or bushing and brazing it in position. Will hold multiple layers of material.
BLACK OXIDE FINISH.

LOCKSCREW LOCATING PINS (SLIP FIT) WITH RELIEVED PIN OR WITH ROUND PIN
  • ST'D. PILOT DIAMETER
  • UNDERSIZE PILOT DIAMETER

Use lock screw #1 for all sizes.
"F" dimension is not maintained on small pilot diameters.
HARDENED AND GROUND.

LOCATOR PINS

HARDENED AND GROUND.

LOCATING PINS WITH RELIEVED PILOT (PRESS FIT)
  • ST'D. PILOT DIAMETER
  • UNDERSIZE PILOT DIAMETER

"F" dimension is not maintained on small pilot diameters.
HARDENED AND GROUND.

FLANGELESS LOCATING PINS WITH RELIEVED PILOT (PRESS FIT)

WITH RELIEVED PILOT (PRESS FIT)
HARDENED AND GROUND.

THREADED LOCATING PINS WITH RELIEVED PILOT (SLIP FIT)
  • ST'D. PILOT DIAMETER
  • UNDERSIZE PILOT DIAMETER

WITH RELIEVED PILOT (SLIP FIT)
These precision locating pins are offered with choice of "A" or "B" pilot diameters. "B" pilot diameters are nominally .001 inch smaller than "A" pilot diameters for applications requiring less critical registration. This type of locating pin is designed for threaded hole mounting and should be used with threaded retainers. If bushings to fit pilot diameters are required, mating headless or head press fit bushings of corresponding sizes may be selected.
*F dim. is not maintained on small pilot diameters.
HEAT TREATED AND GROUND FINISH

 

 

THREADED RETAINERS
  • O.D. GROUND OVERSIZE
  • O.D. FINISH GROUND

Threaded retainers are used with threaded locating pins.
HEAT TREATED

 

SHOULDER RETAINERS
  • O.D. GROUND OVERSIZE
  • O.D. FINISH GROUND

HEADLESS RETAINERS
  • O.D. GROUND OVERSIZE
  • O.D. FINISH GROUND

BULLET NOSE PINS
  • ROUND
  • RELIEVED 

HEAT TREATED AND GROUND

       

LINER FOR BULLET NOSE PINS

HEAT TREATED & GROUND -BLACK OXIDE

BULLET NOSE DOWELS

HEAT TREATED AND GROUND

LINER FOR BULLET NOSE DOWELS

HEAT TREATED AND GROUND BLACK OXIDE

CAM ROLLERS AND PINS

FOR BROWN & SHARPE AUTOMATICS
HARDENED ROLLERS MADE OF 52100 STEEL.

ROLLERS AND PINS

FOR BOYER SHULTZ AND BROWN & SHARPE BOX TOOL
HARDENED ROLLERS MADE OF 52100 STEEL

DAVENPORT ROLL BLANKS

HARDENED ROLLERS MADE OF 52100 STEEL.

3488 FM 730 North, Decatur, TX 76234
Phone: 940-627-6031 | Toll Free: 877-5DALTEX | Fax: 940-627-7832
info@dal-texenterprises.com