TOOLING COMPONENTS

  • TORQUE SCREWS
TYPE "A", STANDARD

For use in all normal supporting operations.
Check nuts are furnished with all torque screws at no additional charge.

TYPE "B", INVERTED

Applies reverse holding support for work pieces. Ideal for use in limited fixture space.
Check nuts are furnished with all torque screws at no additional charge.

TYPE "C" , T-HEAD

For use with sliding V-blocks. Tee end fits V-block for forward and reverse motion.
Check nuts are furnished with all torque screws at no additional charge.

ADJUSTABLE TYPE "D"

A simple wrench adjustment in the head permits holding pressures to be varied as needed. Perfect for supporting either fragile or heavy work pieces.

STANDARD TORQUE HEAD SCREW WITH SWIVEL PAD
  • STEEL PAD
  • NYLON PAD
ADJUSTABLE TORQUE HEAD SCREW WITH SWIVEL PAD
  • STEEL PAD
  • NYLON PAD

TOOLING COMPONENTS

  • WORK HOLDING DEVICES
BALL UNIT ASSEMBLY, STANDARD

A Ball-Unit assembly lets you add versatility and ease to your fixture building, machine set-ups, and clamping devices. A serrated gripper or rest pad in a Ball-Unit snaps into an adjustable or fixed housing that contains an O-ring. The O-ring retains the, ball, facilitates the swivel action, and keeps contaminants out to ensure smooth movement. There are no angles to figure out. You just put the ball-unit in position and it self aligns (min. 100) to the irregularity of the workpiece.
Ball Unit assembly includes a hex headed adjustable unit housing unit ball, "O" ring and replaceable gripper mounting screw.

 

HEX BALL UNIT ASSEMBLY

Must specify style of ball by including "S" for Serrated, "F" for Flat or "D" for Delrin.

BASE

Must specify style of ball by including "S" for Serrated, "F" for Flat or "D" for Delrin.

THREADED

Must specify style of ball by including "S" for Serrated, "F" for Flat or "D" for Delrin.

REST PADS, TAP HOLE DESIGN
  • STEEL REST PADS
  • DELRIN REST PADS
BASE DESIGN

**Replaceable pad must be purchased separately.
Available Replaceable Pads:
Serrated (High Speed Steel, Carbide Tipped or Solid Carbide)
Smooth (Hardened Steel or White Delrin)

THREADED DESIGN

**Replaceable pad must be purchased separately.
Available Replaceable Pads:
Serrated (High Speed Steel, Carbide Tipped or Solid Carbide)
Smooth (Hardened Steel or White Delrin)

ROUND DESIGN - HARDENED TOOL STEEL
ROUND DESIGN - COUNTER BORE -HARDENED TOOL STEEL

HARDENED TOOL STEEL

SQUARE DESIGN - COUNTER BORE - HARDENED TOOL STEEL

HARDENED TOOL STEEL

SQUARE DESIGN - HARDENED TOOL STEEL
ROUND DESIGN - CARBIDE TIPPED
SQUARE DESIGN - CARBIDE TIPPED
ADJUSTABLE HEX HEAD THREADED - CARBIDE TIPPED

CARBIDE TIPPED

ADJUSTABLE THREADED - CARBIDE TIPPED

TOOLING COMPONENTS

  • WASHERS
FLAT WASHERS

CASE HARDENED, BLACK OXIDE FINISH

SPHERICAL WASHER SETS

CASE HARDENED, BLACK OXIDE FINISH

SPHERICAL - TOP ONLY

CASE HARDENED, BLACK OXIDE FINISH

SPHERICAL - BOTTOM ONLY

CASE HARDENED, BLACK OXIDE FINISH

C-WASHERS

CASE HARDENED, BLACK OXIDE FINISH

SWING C-WASHERS

Socket Shoulder Screw (included)
Swing C-washers are intended for use in repetitive clamping applications requiring frequent insertion and removal of part being clamped. Precision shoulder - dimeter of screw acts as pivot pin for swing C-washer.
* Swing C - washers available with seat for spherical flange nut add "D" after number.
HEAT TREATED STEEL - BLACK OXIDE FINISH

3488 FM 730 North, Decatur, TX 76234
Phone: 940-627-6031 | Toll Free: 877-5DALTEX | Fax: 940-627-7832
info@dal-texenterprises.com