TOOLING COMPONENTS

  • HOIST RINGS

FLAT STORAGE HOIST RING

- Forged Alloy Steel
- Heat Treated
- Black Oxide Finish
- Pivots 180o
- 6:1 Safety Factor
Important Note:
To achieve maximum load strength, High Strength Socket Head Screws must lie used (P/N's 470-60 thru 470-62).
(Mounting screw not included)

 

HIGH STRENGTH SOCKET HEAD SCREW
HEAVY DUTY HOIST RING

- Heavy Duty
- Load Rating to 12,000 lbs.*
- Swivel 360o
- Pivots 180o
- 5:1 Safety Factor
TECHNICAL INFORMATION
MATERIAL: 4140 Aircraft quality high strength alloy steel with minimum tensile strength of 180,000 psi, certified heat treatment with 100% magnaflux inspection. Corrosion resistant plating. Maximum operating temperature: 400o F.
* For load ranges of 15,000 to 1000,000 lbs. call Dal-Tex for price and availability.

 

 

HOIST RING ASSEMBLIES
  • STANDARD CLEVIS
  • LONG CLEVIS

- Safety Engineered
- Swivel 360 deg
- Pivots 180 deg
- 5:1 Safety Factor
- Replaces Conventional eyebolts
TECHNICAL INFORMATION
MATERIAL:4140 High strength alloy steel.
FINISH:Black Oxide
Clevis,bolt, pins and bushing are magnetic particle inspected.
* Stated load capacity based on specific thread torques as shown in the table.
** It is recommended that these torques be used when installing hoist rings.

 

 

 

SIDE PULL HOIST RINGS METRIC HOIST RING ASSEMBLIES

- Side-Pull Feature
- Extra Large Rings
- 5:1 Safety Factor
TECHNICAL INFORMATION
MATERIAL: High strength alloy steel.
Clevis, ring, bushing and cap screw are magnetic particle inspected. Clevis is x-rayed.
The swivel and pivot action of the Side-Pull Hoist Ring allows you to flip and turn parts without unhooking. You are also able to use almost any size hook because of the extra large diameter rings.
* Stated load capacity based on specific thread torques as shown in the table.
** It is recommended that these torques be used when installing hoist rings.

 

 

 

METRIC HOIST RING ASSEMBLIES

-Safety Engineered
-Swivel 360o
-Pivots 180o
-5:1 Safety Factor
-Replaces Conventional Eye Bolts

TECHNICAL INFORMATION

-MATERIAL: 4140 High strength alloy steel.
-FINISH: Black Oxide
-Clevis, bolt, pins and bushing are magnetic particle inspected.

 

HEAVY DUTY SAFETY HOIST RINGS 
Heavy Duty
Swivel 360o
Pivots 180o
5:1 Safety Factor

TECHNICAL INFORMATION
MATERIAL: 4140 Aircraft quality high strength 
alloy steel with minimum tensile strength of 
180,000 psi., certified heat treatment with 
100% magnaflux inspection.  
Corrosion resistant plating.
Maximum operating temperature: 400oF.
 

3488 FM 730 North, Decatur, TX 76234
Phone: 940-627-6031 | Toll Free: 877-5DALTEX | Fax: 940-627-7832
info@dal-texenterprises.com