TOOLING COMPONENTS

  • E-LOK THREAD INSERTS

   INSERT INSTALLATION INFORMATION

    TECHNICAL INFORMATION

E-Z LOK THREAD INSERTS
  • COARSE THREAD/FINE THREAD
  • METRIC THREAD
E-Z LOK THREAD INSERTS
  • 303 STAINLESS STEEL PASSIVATED
  • CARBON STEEL - EXTRA HEAVY WALL
E-Z LOK THREAD INSERTS

Repair and prevent stripped threads with E-Z lok Thread Inserts

E-Z LOK THREAD INSERTS
  • CARBON STEEL - THREAD REPAIR KITS
  • CARBON STEEL - THREAD INSERT REPAIR KITS - METRIC INTERNAL / METRIC EXTERNAL
  • THREAD INSERT REPAIR KITS - 303 STAINLESS STEEL - PASSIVATED
E-Z LOK PRESS INSERTS FOR PLASTICS FOR CORED OR DRILLED HOLES IN PLASTICS
E-Z LOK 240 SERIES: This diamond knurled insert was designed to replace molded-in inserts and threads in plastic castings. Installed "cold", press inserts sharply reduce the cost of moldings. The number of "shots" per hour is multiplied; reject waste caused by misaligned and faulty inserts is cut and no re-tapping to clean threads is necessary. In addition to providing clean threads, press inserts also provide screw-locking action unattainable in molded-in inserts. Along with this self-locking feature, you also have an insert that is not critical to hole depth and does not require any secondary operation to secure the fastener in the hole.
 

 

E-Z LOK PRESS INSERTS FOR PLASTICS

E-Z LOK 260 SERIES: Where headed inserts are required, this variation of the standard 240 fills the bill. Recommended for use in terminal strips and like application in electronic assemblies.
E-Z LOK FINSERS FOR WOOD & PLASTICS
  • E-Z LOK 170 SERIES
E-Z LOK FINSERS FOR WOOD & PLASTICS
  • E-Z LOK 270 SERIES
E-Z LOK FINSERS FOR WOOD & PLASTICS
  • E-Z LOK 370 SERIES
E-Z LOK KNIFE THREAD INSERTS FOR WOOD

External knife threads provide superior holding power in hard and soft woods, particle board and all wood products.
Use wherever field assembly or disassembly could lead to thread erosion or stripping.
The long pilot assures straight driving into a drilled hole.
Install with screw driver, bolt and nut, tapping head, or E-Z LOK drive tool.  

 

E-Z LOK HEX DRIVE KNIFE THREAD INSERTS FOR WOOD
An inexpensive insert for use in ready-to-assemble furniture, drawer pulls and wherever ease of assembly or avoidance of thread stripping is desired.
Install with hex drive wrench or E-Z LOK drive tool.

E-Z LOK303 STAINLESS STEEL/METRIC SIZES
  • METRIC INTERNAL - U.S. EXTERNAL
  • METRIC INTERNAL - METRIC EXTERNAL
303 STAINLESS STEEL KITS
THIN WALL CARBON STEEL THREAD INSERTS FOR METAL

Ideal for applications where thread insert size and weight are an issue, Thin Wall thread inserts pack all the advantages of traditional E-Z LOK inserts into a smaller diameter design.
Available with internal thread sizes from #10 through 1/2", Thin Wall thread inserts install with standard drills, taps and wrenches. Standard size and pitch external threads eliminate the need for special tap or drill sizes installation tools.
Self locking external threads with pre-applied Loctite keep Thin Walls from backing out or vibrating loose. Immediately upon installation, the micro-encapsulated Loctite begins to set and the newly installed insert can be fastened to within minutes.
In addition, the adhesive seals against liquids and gases to pressures of 6,000 psi and bonds to virtually all metals.

 

 

 

 

E-Z THREAD INSERT REPAIR KITS

Packaged in a heavy duty box with hinged lid and snap lock.  Refills available packed five or ten to a carton, depending on size.

E-Z LOK THREAD INSERTS - AUTOMOTIVE DESIGNS 

Repair stripped threads in spark plug ports with E-Z LOK inserts.
Open or closed end to repair stripped threads for VW cylinder head studs.

E-Z LOK THREAD INSERT REPAIR KITS                        

Packaged in a heavy duty box with hinged lid and snap lock.
Refills available packed five or ten to a carton, depending on size.

Back

Drill Bushings | Tooling Components